7.1.1 The devices of the system shall set,on their prominent positions,with durable and illegiblemarkings or nameplates,indicating the following contents:a) Type and name of the device;b) Full name and trademark of the manufacturer;c) Rated parameters;d) ...[继续阅读]

    The following referenced documents are indispensable for the application of this document.Fordated references,only the edition cited applies.For undated references,the latest edition of thereferenced document (including any amendments)applies.GB/T 191-200...[继续阅读]

    The packaging shall meet the requirements of GB/T 13384-2008....[继续阅读]

    The terms and definitions defined in TB 10008-2015 and the following apply to this standard....[继续阅读]

    It shall be performed in accordance with the method specified in Chapter 15 of GB/T 7261-2016....[继续阅读]

    Refer to Figure A.1 for wiring diagram of typical simulation test of system functions.Figure A.1 Wiring Diagram of Typical Simulation Test of System Functions...[继续阅读]

    4.1.1 Normal Service Atmospheric ConditionsLocal monitoring computer:a) Ambient temperature:-10℃-+55℃ under normal operation;b) Relative humidity:40%-90%;c) Atmospheric pressure:70 kPa-106 kPa.Protection and measurement device and communication process de...[继续阅读]

    The damp heat test shall be performed for the device in accordance with the method specified inGB/T 2423.4-2008....[继续阅读]

    5.8.1 Vibration Test (Sinewave)The vibration response and vibration resistance tests shall be performed for the device inaccordance with the method specified in GB/T 11287-2000.5.8.2 Shock TestThe shock response and shock resistance tests shall be perform...[继续阅读]

    The original packing cases of the device shall be maintained,and the device shall be stored underthe conditions specified in 4.1.2 and 4.1.3,the place for the storage shall have no acid,alkali,salt orcorrosive or explosive gases or invasion of dust,rain o...[继续阅读]