当前位置:首页 > 科技文档 > 矿业工程 > 正文

Mineralogical Characteristics of Unusual Black Talc Ores in Guangfeng County, Jiangxi Province, China

矿物学报 页数: 1 2013-07-15
摘要: Talc is a hydroxyled, magnesium-rich, layered silicate that has the ideal chemical formula Mg3Si4O10(OH)2. Due to its unique properties, such as softness, chemical inertness, high thermal stability, low electrical conductivity, lamellar habit, adsorption properties, and occurrence of a wide range of particle sizes that can be easily reduced by milling and high specific surface area, talc is widely used in many industries. A stratified deposit of unusual black talc, an occurrence of talc estimated to be more than half a billion tons, was found exposed in the late Neoproterozoic Dengying Formation, located in Guangfeng County, Jiangxi Province, southeastern China. The ores occur primarily as oolitic structures (Fig. 1). The mineralogical and geochemical characteristics of the ores were investigated by using multiple techniques. The ores were found to mainly consist of talc (30%–70%), dolomite, quartz, and magnesite. Most of talc crystals are ultrafine (with an average crystallite size of smaller than 5 μm) and appear as irregular broken or distorted lamellar flakes. The total organic carbon (TOC) content of the black talc ore samples is generally lower than 1.0%. Electron-microprobe analysis (EPMA) revealed low contents of Na, K, Ca and Mn, Fe, Ni, Al in the talc oolitic particles. The talc ores have low contents of toxic elements and relatively high contents of Li and Zn. The infrared spectrum of the black talc is similar to that of white talc from Trimouns (Pyrenees, France), and their Brunauer–Emmett-Teller (BET) specific surface areas, ranging from 15.7 to 23.2 m2/g, is much higher than those of white talc (normally lower than 5.0 m2/g), which may be due to the small size of the talc crystals. (共1页)

开通会员,享受整站包年服务
说明: 本文档由创作者上传发布,版权归属创作者。若内容存在侵权,请点击申诉举报